●
se
TU
p
English_19
1. Press the Function Setup switch.
Main setup menu is displayed on the monitor screen.
2.
Select a desired function using the Function Setup switch.
Place the cursor over a desired item.
3.
Set up a selected item by using the Function Setup switch.
4.
To finish the setting, select ‘EXIT’ and press the Function Setup switch.
`
An item with the
icon also has sub menus. To select a sub menu, select an item with the
icon and press the Function Setup switch.
`
An item with the
- - -
icon is unavailable due to function settings.
leNs
Using this function, you can control the screen brightness.
1.
When the SETUP menu screen is displayed,
select
‘LENS’ by using the Function Setup switch so that the
arrow indicates ‘LENS’.
2.
The Lens mode has sub menu site as listed below.
BRIGHTNESS : Adjusts the video brightness.
FOCUS ADJ : To adjust the lens focus correctly, you must activate the Focus Settings mode. To
activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode.
You can adjust the shutter value of manual shutter mode.
Change the status
using the Function
Setup switch left/right.
Select the function
using the Function
Setup switch up/
down.
M
MAIN SETUP
▶
1. LENS DC
2.EXPOSURE
3.DEFOG OFF
4.WHITE BAL ATW
5.BACKLIGHT
OFF
6.SSNR ON
7.DAY/NIGHT
AUTO
8.SPECIAL
9.EXIT SAVE
DC LENS
▶
1. BRIGHTNESS
IIIIIIIIIIII
*
IIIIIIIIIIII
10
2. FOCUS ADJ
3. RETURN
SCD-1080_ENG.indd 19
2012-8-27 10:33:08