22_ setup
setup
HlC (High light Compensation) :
This function masks any areas of peak white light, this
minimizes whiteout due to over exposure and thus preserve
much of the on-screen details that are within the camera view.
- LEVEL : Adjusts the brightness level of a monitoring area.
- LIMIT : Enable to change the operating condition.
- MASK COLOR :Change the color of the masking area.
(Black, Red, Blue, Gray, Magenta)
Off :
Not being used
.
ssNR
This function reduces the background noise in a low luminance environment.
1.
When the SETUP menu screen is displayed, select
'SSNR' by using the Function Setup switch so that the
arrow indicates 'SSNR'.
2.
Select a desired mode using the Function Setup switch.
Off
: Deactivates SSNR. Noise is not reduced.
ON
: Activates SSNR so that noise is reduced.
3. Set the SSNR mode to 'ON' and press the Function Setup switch.
4. Then you can adjust the noise reduction level.
`
You cannot set the SSNR to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.
`
When adjusting the noise reduction level of the SSNR mode, remember that the higher the level set, the
more the noise level will be reduced but that after image may also occur.
M
HLC SETUP
▶
1. LEVEL
MIDDLE
2. LIMIT
NIGHT ONLY
3. MASK COLOR
BLACK
4. RETURN
SSNR
▶
LEVEL
IIII
*
IIIIIIIIIIIIIIIIIIIIII
4
RETURN
SCD-1020_1040_ENG.indd 22
2012-8-27 10:08:30