20_ setup
setup
defOGGING
Through the defogging function, camera can automatically recognize fog concentration of the image, defog,
self correct in hazy, rainy, flue gas and other inclement weather to get a clear image.
1.
When the SETUP menu screen is displayed, select ‘DEFOG’ by using the Function Setup switch.
2.
Select a desired mode.
AUTO: The camera will automatically correct image according
to the defogging level (low, middle, high) set by the user.
Manual: The camera will adjust the definition of the image
according to user's preferences through the defogging level
(low, middle, high).
OFF: Turn off Defogging function.
`
Defogging and SSDR function cannot be run simultaneously. When defogging function is set to AUTO
or MANUAL mode, SSDR function is not available. When SSDR functions is turned on, defogging
would become inactive.
WHite bal(WHite balaNCe)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal’ by
using the Function Setup switch so that the arrow indicates ‘White
Bal’.
2.
Select a desired mode using the Function Setup
switch.
※
Select one of the following 5 modes, as appropriate for your
purpose.
ATW:
Select this when the color temperature is between 1,700°K and 11,000°K.
OUTdOOR
: Select this when the color temperature is between 1,700°K and 11,000°K.(sodium light
inclusion)
M
DEFOG SETUP
1.LEVEL
MIDDLE
2.RETURN
WB MANUAL
RED GAIN
IIIIII
*
IIIIIIIIIIIIIIIIIIII
106
BLUE GAIN
IIIIIIIIIIIIIIIII
*
IIIIIIIIII
259
Press SET to Return
SCD-1020_1040_ENG.indd 20
2012-8-27 10:08:30