Samsung SCC-C6439P, User Manual, Page: 9 / 250

English _
English
Use the three “ SCREWS ” to fix the “ FRAME SET ” on a “ CAMERA ” installation
position.
Connect external cables to the “
CONNECTORS(ALARM IN, POWER, RS-485,
ALARM OUT) ”and connect the “ CONNECTOR ” to the “ ADAPTOR ”.
Insert the cable into the “ FRAME SET ”, and close the “ ADAPTOR ”.
Then, wrap the “ BNC JACK ” with the “ INSULATION TUBE ”, and use an insulation
tape to seal up the end of the “
INSULATION TUBE
” so that the “
BNC JACK
” does
not protrude outside of the “ INSULATION TUBE ” coating.
For more information about cable connection, refer to “ Connecting the adaptor
cable ”. (page 17)
2.
3.
M

FRAME SET
ADAPTOR
SNAP FIT
INSULATION TUBE
BNC JACK
ALARM OUT
ALARM IN RS-485
POWER INPUT
FRAME SET
ADAPTOR
SCREW
SCREW
SCREW
<Fixing Hole Diagram>
00882K-EU2_SCC-C6439P-ENG-1.indd9 9 2009-10-10 10:35:50