manualshive.com logo in svg

Samsung SCC-C6403, Owner'S Instructions Manual, Page: 24 / 29

Share
Download
Samsung SCC-C6403 Owner'S Instructions Manual Download Page 24

3-23

E

3-22

SPEED

This is a setting function for movement speed setup.  It can be set from
STEP1 to STEP64.

DWELL TIME

This is a function for setting up the time to stay in the START to END position.

PATTERN

This is a replay function so that the MANUAL functions such as PAN, TILT,
ZOOM, and FOCUS, IRIS are played for 2 minutes.

❈

When the PATTERN is saved/executed, the PAN/TILT is operated with
PROPORTIONAL ON, TURBO OFF. 

❈

If the SSC-1000 or SSC-2000 is used when uploading/downloading the
menu setup, reset the PATTERN because it may be different with the first
setting.      

AUTO PAN 

After selecting the locations of two points (PAN/TILT) of START and END,
it loops continuously in the set up SPEED. The number of AUTO PAN is
up to 4.

5. AUTO SET

The AUTO SET menu includes AUTO PAN, PATTERN, and SCAN and it is
able to set up the AUTO PLAY motion.

➜

Press 

[Enter]

** MAIN MENU ** 

CAMERA SET...

VIDEO SET...

PRESET...

ZONE SET...

AUTO SET...

ALARM SET...

OTHER SET...

SYSTEM INFO...

(AUTO SET)

AUTO PAN              1...

PATTERN

1...

SCAN

1...

AUTO PLAY

...

RET

➜

Press 

[Enter]

AUTO PAN   1

POSITION SET         ...

SPEED

22

DWELL TIME

3S

EXIT

QUIT

POSITION SET

The menu “POSITION SET …” sets the Start / End position of AUTO PAN.
Return to the settings screen and set the desired START position for
PAN/TILT, and then press the [ENTER] key. And, set the END position for 
the PAN/TILT. Press the [ENTER] key to finish the setup for AUTO PAN
Start/End positions.

00570A-SCC-C6403-ENG  8/17/06 1:51 PM  Page 3-22

Summary of Contents for SCC-C6403






























Reviews:

No comments