Samsung SCC-C6323N, User Manual, Page: 29 / 215

English – 29
ENG
How to use OSD Menu
r
Edit Preset Label
LABEL - PRESET 1
[ █ ]
----------
1234567890
OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------
①
Edits label to show on monitor when camera
arrives at presets. In Edit Label menu, a reverse
rectangular is cursor. As soon as fi nishing
selecting alphabet, cursor moves to the next digit.
[ █ ]
Current Cursor Position
②
Using Left/Right/Up/Down of joystick, move to
an appropriate character from the Character set.
To choose that character, press the
NEAR or
ENTER key.
----------
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------
Back Space Char. Space Char.
If you want to use blank, choose Space
character (“ ”). If you want to delete a character
before, use back space character (“ ”).
③
If you complete the Label editing, move cursor
to “ OK ” and press NEAR or ENTER key to save
completed label. To abort current change, move
cursor to “Cancel” and press
NEAR or ENTER
key.
❖
AUTO PAN SETUP
AUTO PAN SETUP
APAN NO. 1
1ST POS. NOT USED
2ND POS. NOT USED
APAN SPEED 30/SEC
CLEAR APAN
CANCEL
BACK
EXIT
APAN Number [1~8]
Selects Auto Pan number to edit. If a selected Auto
Pan has not defi ned, “NOT USED” is displayed in 1st
Position and 2nd Position
1ST POSITION [PRESET 1~128]
2ND POSITION
Set up the 2 position for Auto Pan function. If a
selected preset is not defi ned, “UNDEFINED” will be
displayed as shown below.
AUTO PAN SETUP
APAN NO. 1
1ST POS. PRESET5
2ND POS. NOT USED
UNDEFINED
When Auto Pan function runs, camera moves
from the preset assigned as the 1st point to the
preset assigned as the 2nd point in CW (Clockwise)
direction. Then camera moves from the preset
assigned as the 2nd point to the preset assigned as
the 1st point in CCW (Counterclockwise) direction.
In case that the preset assigned as the 1st point
is same as the preset assigned as the 2nd point,
camera turns on its axis by 360
° in CW direction and
then it turns on its axis by 360 ° in CCW direction.
APAN SPEED [1°/sec ~180°/sec]
Sets Auto Pan speed from 1°/sec to 180°/sec.
CLEAR APAN [CANCEL/OK]
Deletes current Auto Pan data.
•
•
•
•
•