Samsung SCC-B531xBN User Manual Download Page 14

14

15

4. 

When you install the 

Mount bracket

 on the ceiling, remove the 

Ceiling mount opener

 by 

pressing it hard to connect the line attached on your camera through the hole in the ceiling. 

Otherwise, you can use the empty space opposite to the CAMERA FRONT sign for line 

connection.

5. 

Now attach the 

Main body

 to the 

Mount bracket

 by rotating it in the LOCK direction after 

aligning the 

Lock releaser

 on the Main body with the wide groove around the CAMERA 

FRONT inlay.

6. 

Adjust the camera direction. For more details on the direction control, see “Adjusting the 

camera direction,” on the same page.

7. 

Finally attach the 

Cover dome

 to the 

Main body

 by pressing it until a “click” sound is heard 

after aligning the wide groove at the lower part of the Cover dome with the 

Locker

 on the 

Main body. 

  Adjusting the camera direction

When the camera is fixed on the ceiling, you can adjust 

the camera viewing angle. You can rotate your camera 

leftward or rightward (Panning), and can change the 

slope of your camera upward or downward (Tilting). 
In case of panning, the rotation limit of your camera 

is set to 340 degree (220 degree clockwise and 120 

degree counterclockwise). The rotation is stopped by the 

Stopper

 inside of the camera. For panning control, first 

unfasten two screws located on the bottom and rotate in 

the direction you want, and then fasten them to fix the 

camera. When both fixing screws cannot be tightened, 

change the location of screws. When inevitable, just 

tightening one screw is alright.
In case of tilting, you can change the slope of your camera from zero to 90 degree. When 

the slope angle is under 23 degree, you can encounter a partial image hide problem. To fix 

the location after adjusting the tilting angle, use the 

Tilt fixing screws

.

To adjust the focus of your camera, rotate the fixed lens for clear image. When you install 

the camera on the inclined ceiling or wall, you can rotate the camera lens to see a correct 

direction image.

Panning

Tilting

Lens rotation

AB68-00647C(01)Eng.indd   14

2007-05-14   ソタネト 4:23:13

Summary of Contents for SCC-B531xBN





















Reviews: