31
Operating Instructions
Operating Instructions
30
5) AGC MODE
Move the cursor to “AGC” and select “ON/OFF”
using the right/left direction switch.
When it is set “OFF”, the camera set the AGC
gain DATA to “0”.
When it is set “ON”, AGC is operated.
6) WHITE BAL MODE
Move the cursor to “WHITE BAL” and select
“ATW/AWC/MANU---” using the right/left
direction switch.
(SET UP)
OFF
OFF
ALC---
OFF
ON
ATW
INT
FIX
OFF
QUIT?
CAMERA ID
SENSE UP
ALC/ELC
BLC
AGC
WHITE BAL
SYNC
VIDEO CON
MOTION DET
EXIT
(SET UP)
OFF
OFF
ALC---
OFF
ON
MANU---
INT
FIX
OFF
QUIT?
CAMERA ID
SENSE UP
ALC/ELC
BLC
AGC
WHITE BAL
SYNC
VIDEO CON
MOTION DET
EXIT
- When “ATW” selected, Auto White Balance
Control is on.
- When “AWC” is selected, White Balance Control
memorized previously utilizing AWC is on. When
setting new AWC condition, press the Setup
Switch while AWC is selected. Then AWC
becomes flickering and White Balance Control is
operated to memorize the data. When the setting is
completed, the flickering stops.
* While “ATW” always calls White Balance, “AWC”
calls White Balance only once when the user
presses the Setup Switch.
- When “MANU---” is set, White Balance is called in
the condition, which is determined on
AWB/MANU MENU.
(1) Setting AWB/MANU MENU
Move the cursor to “PRESET” and select the
“PRESET 3200K/PRESET 5600K/PRESET OFF
(USER)--” using right/left direction switch.
(AWB/MANU)
PRESET 3200K
RET
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 30