29
Operating Instructions
Operating Instructions
28
BLC Range Setting
Select the BLC Menu and move the cursor to
“AREA SET---”. Then press the Setup Switch to
have the BLC Area displayed. Select the Area
Location using the right/left direction switch.
Press the Setup Switch on the designated spot to make the
BLC setting ON. Press it once more to turn it into OFF.
(*Location can be adjusted only when the PRESET is OFF.
When it is ON, it is fixed as it is set when shipment is made.)
Press the Setup Switch for longer than 2 seconds after the
location setting is completed to return to the previous Menu
(BLC Mode).
BLC is operated by the data for the areas selected when BLC is
“ON---”. (Areas with
■
mark indicate where IRIS DATA is set.)
– IRIS Setting
Move the cursor to “IRIS” and adjust the relevant
data using right/left direction switch.
Iris value of the DC lens is determined by the
selected data. (For Video lens, the iris value is
determined by the data value only when the BLC
motion is set “ON”.)
(2) Setting ELC Menu
First, select ELC on ALC/ELC Menu and select
the LEVEL. Target level can be adjusted using
the right/left direction switch. (ELC menu is
used only for non AI Lens.)
4) BLC Mode
Move the cursor to “BLC” and select “OFF/
ON---” using the right/left direction switch.
When “OFF” is set, BLC is not operated.
When “ON---” is set, BLC is operable.
* When WDR is ON---, BLC is indicated as “---”
and its setting is not to be changed.
(SET UP)
OFF
OFF
ALC---
ON---
ON
ATW
INT
FIX
OFF
QUIT?
CAMERA ID
SENSE UP
ALC/ELC
BLC
AGC
WHITE BAL
SYNC
VIDEO CON
MOTION DET
EXIT
(BLC)
AREA SET---
PRESET OFF
RET
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 28