23
Operating Instructions
Operating Instructions
22
(SET UP)
ON---
OFF
ALC---
OFF
ON
ATW
INT
FIX
OFF
QUIT?
CAMERA ID
SENSE UP
ALC/ELC
BLC
AGC
WHITE BAL
SYNC
VIDEO CON
MOTION DET
EXIT
(CAMERA ID)
A B C D E F G H I J K L
M N O P Q R S T U V W X
Y Z 0 1 2 3 4 5 6 7 8 9
. ; : ? + - * ( ) /
SP
➝
SP
LOCATION
RET
. . . . . . . . . . . .
➝
A total of 12 characters can be entered.
Move the character cursor to the position you want
using the up/down/right/left direction switch and
then press the Setup Switch.
Repeat this until you have the text you want. When
you want to enter a space between letters, move the
character cursor to “SP
® ¬
SP” and press the
Setup Switch.
When all the characters you want are entered, move
the cursor to “LOCATION” and press the Setup
Switch to have the menu that allows you to change
the location of camera ID.
The location of the camera ID can be changed and
fixed using the up/down/right/left direction switch.
Press the Setup Switch for 2 to 3 seconds after the
location is selected to return to the previous Sub
Menu screen. Place the selection cursor at “RET”
on Sub Menu screen and press the Setup Switch to
return to the Setup Menu screen.
Set “ON---” for the selected camera ID to be
displayed on the screen.
2) Sense Up Mode (Low Illumination Mode)
First, move the cursor to the “Sense Up” and
select the scale mode, which is suitable for the
camera environment using the right/left
direction switch.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 22