Samsung S9C Quick Start Manual Download Page 1

 

 

 BN68-05357A-01

 QUICK START 

GUIDE

 Welcome to your new Smart TV!

 The following instructions cover assembling, connecting, and setting up your new TV. Make 

sure you have the accessories listed below.

 

 

 Included in this box

 

 Remote Control

 One connect and Cables

 

 

 

 Smart Touch Control

  Power  cord

 IR extender

 

 

 

 Batteries (AAA x 4)

 RCA Adapter x 2

 Component adapter

 

 

 

 One connect

 

 Remote Control

 One connect cable

 

 

 

 

 Also included: User manual, 3D active glasses

 

 
 

 

 

 Step

 1

 Attach the TV to 
the Stand

 

 Step

 2

 Connect video 
devices

 

 Step

 3

 Insert the 
batteries into the 
remote control

 

 Step

 4

 Power on and 
start the initial 
setup

 
 

 

 Warning: Screens can be damaged 
from direct pressure when handled 
incorrectly. We recommend lifting the 
TV by the edges, as shown.

 

 

 

 Step 1 

Attach the TV to the Stand 

 

 1

 Open the package, and remove the cushioning.

 

 6

 M4 x L20

 Secure the stand to the TV using four screws as 

shown in the diagram.

 

 REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV 

(such as the box).

 

 2

 Stand cover

 Screws

 Stand

 M4 x L20 4 pieces

M4 x L10 2 pieces

 x 4

 x 2

 Pull the stand out of the top Styrofoam 

cushioning, and make the stand face your body, 

as shown in the illustration. Insert a finger 

into the groove in the middle and pull it up to 

separate the cover from the stand.

 

 7

 To replace the stand cover, fix its exterior and 

then the interior into the stand. Press both 

sides firmly to make sure that it is completely 

assembled.

 

 3

 Remove the TV from the box. Then, remove 

the top and bottom pieces of Styrofoam from 

the TV, but keep the screen-protection piece 

on. Place the TV down on the the box with the 

screen facing down.

 

 8

 Remove the port cover, and connect the power 

cord to the One Connect.

 

 4

 Hook

 Tilt the stand to put its hook into the groove on 

the back of the TV, and push it, giving it a slight 

turn until it is firmly in place. 

 

 9

 Replace the port cover.

 

 5

 M4 x L10

 Secure the bottom of the stand to the TV using 

two screws.

 

 

 10

 Stand the TV up, and remove the Styrofoam 

bumper and the 4 protective pads from the 

screen.

 S9C

[S9C-QSG]BN68-05357A-01ENG.indb   2

2013-07-12   �� 5:32:44

Reviews: