background image

29

2nd

3rd

Description

Off Timer Plus

Off Timer

• 

Off Timer

: Turn on 

Off Timer

 mode.

• 

Turn Off After

: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of 

hours.

 

This option is only available when 

Off Timer

 is set to 

On

.

 

֜

For products for the market in some regions, the 

Off Timer

 is set to automatically activate 4 hours after the product powers on. This is done in 

accordance with power supply regulations. If you do not want the timer to activate, go to 

 → 

System

 → 

Off Timer Plus 

and set 

Off Timer 

to 

Off

.

Eco Timer

• 

Eco Timer

: Turn on 

Eco Timer

 mode.

• 

Eco Off After

: The 

Eco Timer

 can be set between 10 and 180 minutes. The product will automatically power off after the specified time has 

elapsed.

 

This option is only available when 

Eco Timer

 is set to 

On

.

PC/AV Mode

Set 

PC/AV Mode

 to 

AV

. The picture size will be enlarged. 

This option is useful when you view a movie.

 

֜

Products with a display area of 16:9 or 16:10 are only supported.

Source Detection

Select either 

Auto

 or 

Manual

 as the method to recognise input source.

Key Repeat Time

Control the response rate of a button when the button is pressed.

Acceleration

1 sec

 or 

2 sec

 can be selected. If 

No Repeat

 is selected, a command responds only once when a button is pressed.

Power LED On

Configure the settings to enable or disable the power LED located at the lower part of the product.

• 

Working

: The power LED is on when the product is turned on.

• 

Stand-by

: The power LED is on when the product is turned off.

Summary of Contents for S24C36 Series









































Reviews: