background image

English 

45

 

Installation

STEP 7 

Connect to a water source

CAUTION

•  The new hose-sets supplied with the appliance are to be used and that old hose-sets 

should not be reused.

•  The water line must be connected by a qualified technician.
•  The warranty for your refrigerator does not cover the water line installation. The 

water line installation will be performed at your own costs unless the installation fee is 
included in the retailer’s price.

•  Samsung takes no responsibility for the water line installation. If water leaks occur, 

contact the installer of the water line.

To connect the cold water pipe to the water filtering hose

CAUTION

•  Make sure the water filtering hose is connected to a cold, potable water source pipe. 

Connecting to the hot water pipe may cause the purifier to malfunction.

1

A

B

A

A. 

Close Main Water pipe

B. 

No gap

1. 

Shut off the water supply by closing the 

main water valve.

2. 

Locate the cold, potable 

water pipe (1)

.

3. 

Follow the Water Line Installation to 

connect to the water pipe.

4. 

When connection is complete, open the 

main water valve and dispense about 
3 liters of water. This is to remove 
impurities inside the pipe.

Untitled-2   45

2019-02-22     4:18:10

Summary of Contents for RF22R7351SR/EU

























































































Reviews: