background image

Before calling service

ENGLISH

DA68-02659A  REV(0.0) 

If you have further questions or damaged accessory parts, contact us at 1-800-SAMSUNG (726-7864)

1.  Automatic Ice Maker does not work

Allow your refrigerator to operate and cool down 

• 

for 24 hours (1 full day) before the ice maker starts 
producing ice.

12

3

6

9

2.  Canceling cooling off mode (Freezer/Fridge 

Temperature Indicator moving)

Cooling off function is for store display, and it makes the 

• 

refrigerator not to generate cool air. (Only for product sold in U.S)

In case of Cooling off Mode, refrigerator may seem like working 

• 

but it does not make cool air. To cancel this mode, press the 
“Cooling Off Key” at the same time for 3 seconds until “Ding-dong” 
sounds. 

COOLING OFF KEY

RF221, RF220, RL225 Model : Ice Off + Freezer Key

 

-

RL220 Model : Power Freezer Key

 

-

3. Water dispenser dripping(On some models)

Turn on water supply and Flush 3 gallons through fi lter before use 

• 

(fl ush approximately 6 minutes) 

• 

The water fi lter must be installed outside the refrigerator. 
It is not provided with your new refrigerator. The fi lter 
cartridge (8) and holder (9) kit can be purchased from the 
retailer where you purchased this refrigerator.

Do not use copper line.

• 

Cut the tubing, making sure the ends are square and clean. 

• 

There are several items that you need to purchase to complete this 
connection. 
You may fi nd these items sold as a kit at your local hardware store.

Use Copper Tubing

Use Plastic Tubing

¼” copper tubing
¼” compression nut (1pc)
Ferrule (2pc)

¼” plastic tubing 

 Molded end 

(Bulb)
¼” compression nut (1pc)

4.  Fridge or freezer Compartments are warm

Allow your refrigerator to operate and cool down for 24 hours (1 

• 

full day) to reach to the set temperature.
Also, when you put room temperature or warmer food into your 

• 

refrigerator, it may need an additional 24 hours for the fridge to 
reach the set temperature.

5.  Moisture forms on outside/inside of refrigerator

Wipe off the condensation with a dry towel (This may occur during 

• 

hot and humid seasons.)
If the condensation occurs on the doors, turn off the Energy 

• 

Saving function.
If you open the doors frequently or for too long, it may cause 

• 

moisture inside the fridge.

6.  Noise Clicks, Pops, Cracks, Snaps

These noises may be heard occasionally inside the refrigerator. 

• 

This is normal. This sound occurs when various items contract 
or expand while temperatures are changing; especially during 
defrosting. This may also occur when electronic devices including 
the ice maker are operating.

7. Display

Incorrect

Incorrect

Correct

Correct

( 1 )
Freezer
(Hold 3 sec for 
Power Freeze)

Press the Freezer button to set the freezer temperature 
between colder and coldest.
Press and hold the Freezer button for 3 seconds to activate 
Power Freezer function which speeds up the freezing 
process in the freezer.

( 2 )
Fridge

Press the Fridge button to set the Fridge temperature 
between cold and coldest.

( 3 )
Energy Saver

For better energy effi ciency, press the Energy Saver button. 
If condensation occurs on the doors, turn the Energy Saver 
Button function off.

( 4 )
Ice Off

If you don’t want to make more ice, Press the Ice Off 
button. The LED will light up and the Ice-Maker stops 
making ice.

( 5 )
Alram On/Off

Press the Alarm On/Off button to turn the door open alarm 
on and off.

( 6 )
Power Freeze

Press this button to activate Power Freezer function which 
speeds up the freezing process in the freezer.

8.  Food stored in refrigerator is frozen

If food with too much moisture is stored near the cooling vents, it 

• 

may get frozen. Be sure to keep moist food away from the cooling 
vents.

9.  Moving and Installing

When installing, servicing or cleaning behind the refrigerator, be 

• 

sure of the following:
To protect your fl oor’s fi nish when 

• 

moving the refrigerator, cut a large 
section of the cardboard carton 
and place under the refrigerator 
where you are working.
Pull the unit straight out and push 

• 

back in straight after fi nishing.

10. Leveling & Door Alignment

Insert a fl at-blade screwdriver 

• 

into a slot on the control lever, 
turn it clockwise or counter-
clockwise to level the door.

[RF221, RF220]

[RF221, RF220]

[RL225]

[RL225]

[RL220]

[RL220]

90 degree

90 degree

1. Cold Water line

1. Cold Water line
2. Pipe Clamp.

2. Pipe Clamp.
3. Plastic line

3. Plastic line
4. Compression Nut

4. Compression Nut
5. Compression Sleeve

5. Compression Sleeve
6. Packing Nut

6. Packing Nut
7. Shut Off Valve

7. Shut Off Valve
8. Filter Cartridge

8. Filter Cartridge
9. Cartridge Holder

9. Cartridge Holder

[RF221, RF220]

[RF221, RF220]

[RL225]

[RL225]

[RL220]

[RL220]

1

1

2

2

3

3

4

4

6

6

5

5

Control Lever

Control Lever

Flat-blade screw driver(-)

Flat-blade screw driver(-)

DA68-02659A.indd   1

DA68-02659A.indd   1

2012.6.27   12:7:25 PM

2012.6.27   12:7:25 PM

Reviews: