01 SETTING UP
Setting up your french door refrigerator
_21
When the left
door is lower
than the right
door.
When the left
door is higher
than the right
door.
Adjustment
part
Adjustment
part
1. Pull out the freezer drawer (
1
), then you can see the middle hinge (
2
) .
2. Insert the hex wrench (4mm) (
3
) into the shaft (
4
) of the middle hinge.
3. Please adjust the height by turning the hex wrench (
3
) clockwise (
) or counter-clockwise (
).
1. After adjusting the doors, please insert the supplied fastener (
5
) using Pliers (
6
) in the gap between
the hinge-grommet (
7
) and the middle hinge (
8
). The number of fasteners you’ll need to insert
depends on the gap.
2
3
4
1
3
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember, a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
NOTE
When you turn the hex wrench counter-clockwise(
), the door will move up.
NOTE
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 0.04”.
NW2-FDR_DA68-01845C-26_EN.indd 21
2019-01-22 4:41:50
Summary of Contents for RF21 Series
