37
DISASSEMBLY AND REASSEMBLY
This document cannot be used without Samsung's authorization.
4-9) TOP TABLE (With Sensor Temp)
Part Name
How To Do
Descriptive Picture
TOP TABLE
[Disassembly]
1. Remove the 3 screws holding down the Top
Table and remove it.
Top Table
[Disassembly]
2. Separate wire from top table hook and then
disconnect wire housing
[Disassembly]
3. Pull the wire out to sepa rate top table
structure.
[Assembly]
1. Slide in the sensor to top table assembly
structure. (Sensor must be located under the
hook feature of top table)
Sensor huminity
Top table
[Assembly]
2. Connect sensor wire with top table sub wire
and then fix the wire in top table hook.
When disassembling, make sure the unit turned off.
If you want to assembly, follow the reverse order.