28
This document cannot be used without Samsung's authorization.
• Unplug the refrigerator before cleaning and making repairs.
• Do not dissemble or repair the refrigerator by yourself.
- It may cause risk of causing a fire, malfunction and/or personal injury.
• Remove any foreign matter or dust from the power plug pins.
- Otherwise there is a risk of fire.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own
individual electrical which has a voltage rating that matched the rating plate.
- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard
from overheated wires.
• Do not install the refrigerator in a damp place or place where it may come in contact with water.
- Deteriorated insulation of electrical parts may cause an electric shock or fire.
• The refrigerator must be grounded.
- You must ground the refrigerator to prevent any power leakages or electric shocks caused by current leakage from the
refrigerator.
• Do not put bottles or glass containers in the freezer.
- When the contents freeze, the glass may break and cause personal injury.
• Do not store volatile or flammable substances in the refrigerator.
- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause explosions.
■
Required Tools
IMAGE
ITEM
USE
Phillips Head Driver
Use for assembling and
disassembling of screw.
Flat Head Driver
Use for assembling and
disassembling of HomeBar, Dispenser,
Delicatessen Box, Main PBA etc...
Hex Wrench ø 2mm
Use for assembling and
disassembling of Handle.
Socket Wrench ø 10mm
Use for assembling and
disassembling of Door Hinge.
■
Water whitening phenomenon
All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process, the
pressure in the water that has flowed out of the filter gets increased, and massive oxygen and nitrogen become saturated.
When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they
turn into gas bubbles. The water could look misty due to these oxygen bubbles. It is not because dust or chemicals, just a
few seconds later, it will be clean again.
4-1) Precaution
4. DISASSEMBLY AND REASSEMBLY
