![background image](http://html.mh-extra.com/html/samsung/rainbow-sch-a563/rainbow-sch-a563_user-manual_1193175011.webp)
21
G
Ge
et
tt
ti
in
ng
g
S
St
ta
ar
rt
te
ed
d
20
G
Ge
et
tt
ti
in
ng
g
S
St
ta
ar
rt
te
ed
d
Low Battery Indicator
You can easily tell if your battery needs to be
recharged by checking the Battery Status icon (
) at
the upper-right corner of your phone’s display. The
presence of all three bars indicates a full charge, two
bars indicates a smaller charge, and one bar indicates
an even smaller charge.
When the battery charge level gets low, the battery
sensor blinks an empty Battery Status icon (
) and
sounds a warning tone. If the battery level gets too
low, the phone automatically turns off. When this
happens, you lose whatever you are doing and your
phone call cuts off. Watch the Battery Status icon and
make sure that your battery is adequately charged.
Note:
The battery’s operation time may shorten,
depending on your phone usage. The phone
could be heated when the call time is long.
4. When charging is finished and the service light
turns green, unplug the adapter from the power
outlet and from the phone.
➀
➀
➁
Switching the Phone On or Off
1. Press and hold until the power-on image
displays to switch the phone on.
The service light on the phone flashes and an alert
sounds. When the system locates services, the
Banner greeting message displays along with the
date and time. You can now make and receive calls.
If the phone is out of service, the No Service icon
(
) appears on the display. In this case, you
cannot make and receive calls. You can try again
later when service is available.
Note
: You can change the display language. To
change the language, use the
Language
menu
option (
Menu 8-1
); for further details, refer to
page 98.
2. When you wish to switch the phone off, hold down
more than two seconds.
WARNING!
Do not switch the phone on when mobile phone use
is prohibited or when it may cause interference or
danger.
Note:
As with any other radio-transmitting device,
do not touch the antenna unnecessarily when
the phone is switched on. Contact with the
antenna affects the call quality and may cause
the phone to operate at a higher power level
than otherwise needed.