operating
_05
Selecting the best location for the
Refrigerator
•
A location without direct exposure to sunlight.
•
A location with flat floor surface.
•
A location with enough space for the Refrigerator
door to open easily.
•
Height of the product may be different
depending on the models.
•
Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
•
Do not install the Refrigerator in a place with the
temperature lower than 10°C.
•
When you move the Refrigerator, unplug and
clearly arrange the power cord. Also secure the
glass shelf and the doors with a tape.
•
Pull the unit straight out when installing,
servicing or cleaning behind the
Refrigerator and push it straight back after
work is complete. Make sure your floor
can support fully loaded Refrigerator.
•
Keep ventilation opening in the appliance
enclosure or mounting structure clear of
obstruction.
LEVELING ThE REFRIGERATOR
If the front of the appliance is slightly higher than
the rear, the door can be opened and closed more
easily.
Turn the adjusting legs clockwise to raise and
counter-clockwise to lower the height.
When you adjust the Refrigerator, you may
hurt your hand or fall down.
ADjUSTING ThE
TEMPERATURE CONTROL
DIAL At “Normal” POINT (5 No.)
•
To maintain optimum temperature for food
storage, set the control dial at
the “Normal” Position.
DIAL At “Coldest” POINT
•
When setting the control dial
at the “Coldest” Position, the
Refrigerator be comes coldest.
•
When largequantities of food is
stored, For quickice making set
the control dial at the “Coldest”
Position.
DIAL At “Cold” POINT
•
When setting the control dial at the “Cold”
Position, the Refrigerator becomes warmer.
•
When small quantities of food is stored.
•
If the temperature where the Refrigerator
is placed is lower than 5 °C, set the
temperature control to COLD. Because the
temperature of the Refrigerator is affected
by the temperature around the Refrigerator
and it will be lower than the set value.
•
Apart from knob settings mentioned above, if you
desire to increase or reduce the cooling, turn the
knob clockwise or anticlockwise to the degrees
you want.
hOW TO DEFROST
1)
Check the layer thickness of the frost/ice formed
on the walls of the ice making compartment. If
more frost is formed, please defrost.
2)
Push the “DEF”button to defrost. Frost on the
surface of the evaporator will begin to melt
and can be easily removed. After defrosting is
finished, the refrigerator will start automatically.
operating your Refrigerator
CAUTION
100mm
50mm
1144mm
874mm
at least
50mm
at least
50mm
944mm
534mm
574mm
