Samsung R418 User Manual Download Page 71

Page: 71 / 84

Battery

Please refer to the following instructions when running the computer on battery power

without connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.

Before You Start!

Carefully read and follow the precautions printed on the battery before using the battery.

Precautions

Use only chargers specified in the User Manual.
Never heat the battery pack, put it near or in a fire or use at a temperature higher than

60°C, as this may cause fire.

Never cause a short circuit between the battery pack terminals or disassemble the

battery pack.
Carefully read and follow the precautions printed on the battery and the safety

instructions in the User Manual before using the battery.
Please refer to the system operation environment of this manual and operate and store

the battery at room temperature.

Installing/Removing the Battery

Shutdown the system, close the LCD

panel and place the computer upside

down on a flat surface.

Pull the two battery latches

battery latches

outwards

, then remove the battery.

Summary of Contents for R418





















































































Search results

Summary of Contents for R418

Reviews:

Related manuals for R418

Brands by name

Popular brands

Samsung R418, User Manual

Search results

Summary of Contents for R418

Reviews:

Related manuals for R418

Brands by name

Popular brands