03 Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
•
To perform initialization using the SmartThings app, you must connect your mobile device via Wi-Fi.
•
If the pop-up for setup does not appear automatically on the SmartThings app on your mobile device, continue
setup manually after adding the TV using
Add Device
on the dashboard of the SmartThings app.
•
The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
•
Noise may occur temporarily when the TV communicates with mobile devices.
Using the TV Controller
You can use the
TV Controller
on the bottom of the TV instead of the remote control to control most of the functions
of your TV. While watching TV, you can change the channel by pressing the up and down directional buttons on the
TV Controller
or adjust the volume by pressing the left and right directional buttons. Press the
button on the
TV
Controller
to display the
Control menu
.
To run an item on the menu, press the directional buttons on the
TV Controller
to move the focus to the item, and then
press the
button on the
TV Controller
.
•
The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please
remove the protective film.
TV Controller
/
Remote control sensor
•
Press
button: Display the
Control menu
. / Select or run a
focused item on the menu.
•
Press and hold
button: The running function is terminated.
•
Up/Down button: Changes the channel.
•
Left/Right button: Changes the volume.
The
TV Controller
is located on the bottom of the TV.
Control menu
: Smart Hub
: Source
: Settings
: Power Off
: Return
English - 12
