Samsung ProXpress M403 Series User Manual Download Page 109

Page: 109 / 259

109

5. Appendix

Regulatory information

This machine is designed for a normal work environment and certified with

several regulatory statements.

Laser safety statement

The printer is certified in the U.S. to conform to the requirements of DHHS 21

CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is

certified as a Class I laser product conforming to the requirements of IEC 60825-

1 : 2007.

Class I laser products are not considered to be hazardous. The laser system and

printer are designed so there is never any human access to laser radiation above

a Class I level during normal operation, user maintenance or prescribed service

condition.

Warning

Never operate or service the printer with the protective cover removed from

laser/scanner assembly. The reflected beam, although invisible, can damage

your eyes.

When using this product, these basic safety precautions should always be

followed to reduce risk of fire, electric shock, and injury to persons:

Ozone safety

This product’s ozone emission rate is under 0.1 ppm. Because
ozone is heavier than air, keep the product in a place with good
ventilation.

Summary of Contents for ProXpress M403 Series




































































































































































































































































Search results

Summary of Contents for ProXpress M403 Series

Reviews:

Related manuals for ProXpress M403 Series

Brands by name

Popular brands

Samsung ProXpress M403 Series, User Manual

Search results

Summary of Contents for ProXpress M403 Series

Reviews:

Related manuals for ProXpress M403 Series

Brands by name

Popular brands