Samsung ProXpress 402 Series Service Manual Download

Page: 75 / 157

4. Troubleshooting

4. Troubleshooting

4.1. Alignment and Adjustments

This chapter describes the main functions for service, such as the product maintenance method, the test output related to
maintenance and repair, Jam removing method, and so on.

4.1.1. Control Panel

NOTE

•

This control panel may differ from your machine depending on its model. There are various types of control panels.

•

Some features and optional goods may not be available depending on model or country

M332xND/M382xD

Toner LED

Shows the status of the toner.

Eco

Enters eco mode to reduce toner consumption and paper usage.

Configuration sheet

Prints a demo page by pressing this button.

Cancel

Stops current operation.

Power

You can turn the power on and off with this button. Or wake up from
the power save mode.

Status LED

Indicates the status of your machine.

4-1

Summary of Contents for ProXpress 402 Series
























































































































































Search results

Summary of Contents for ProXpress 402 Series

Reviews:

Related manuals for ProXpress 402 Series

Brands by name

Popular brands

Samsung ProXpress 402 Series, Service Manual

Search results

Summary of Contents for ProXpress 402 Series

Reviews:

Related manuals for ProXpress 402 Series

Brands by name

Popular brands