Sending a fax
157
8. Faxing
11
Resending Automatically
When the line you have dialed is busy or there is no answer when you send a fax,
the machine automatically redials the number.
To change the time interval between redials and/or the number of redial
attempts, follow the steps below:
1
Press
Machine Setup
>
Application Settings
>
Fax Settings
>
Redial
from the display screen.
2
Press a fax line if your machine has multiple fax lines.
3
Set the
Redial Term(min)
option using the + and - buttons.
4
Set the
Redial Times
option using the + and - buttons.
12
Redialing the last number
You can choose fax numbers instead of pressing the number key.
1
Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 64).
2
Press
Fax
from the display screen.
3
Adjust the document settings in the
Advanced
or
Image
tab (see
Summary of Contents for ProCpress M408 Series
