English - 8
Press the
POWER
button on the remote control.
The TV will be turned on and you will be able to use its
features. You can also use the Power button on the front of
the TV
➢
If your TV isn’t turned on when the Power button is
pressed: Press the
TV
button to check if the TV mode
has been chosen.
Turning the TV On and Off
Your TV has a simple, easy-to-use menu system that appears
on the screen. This system makes it convenient and fast to
use the TV’s features.
The TV also displays the status of many features.
Viewing the Menus and Displays
Viewing the Menus
1
With the power on, press the
MENU
button.
The main menu appears on the screen. The menu’s
left side has icons:
Picture
,
Sound
,
Channel
,
Setup, Input
,
Application
.
2
Press the ▲ or ▼ button to select one of the icons.
Then press the
ENTER
button to access the icon’s
sub-menu.from the menu.
Press the
EXIT
button to exit.
➢
It takes about one minute until the on-screen menu
disappears.
Displaying Status Information
Press the
INFO
button on the remote control.
The TV will display the channel, the type of sound, and the
status of certain picture and sound settings.
➢
The information window automatically disappears
after a few seconds. Press the
INFO
button once to
manually close the window.
Memorizing the Channels
Selecting the Video Signal-source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV(i.e., an air or a cable system).
1
Press the
MENU
button to display the menu.
Press the ▲ or ▼ button to select
Channel
, then
press the
ENTER
button.
2
Press the
ENTER
button to select
Antenna
.
Press the ▲ or ▼ button to select
Air
or
Cable
,
then press the
ENTER
button. Press the
EXIT
button to exit.
Mode
: Standard
Cell Light
: 7
Contrast
: 90
Brightness
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Detailed Settings
Picture
TV #1
Sun, Sep 3 1:45 pm
M. Spillane’s Mike Hammer
Bonocrunch
DTV Air
3-
Dolby Digital
480i 4:3 English
12:59 pm - 1:59 pm
Antenna
: Air
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Air
Cable
Channel
Continued...
Storing Channels in Memory (Automatic Method)
1
Press the
MENU
button to display the menu.
Press the ▲ or ▼ button to select
Channel
, then
press the
ENTER
button.
2
Press the ▲ or ▼ button to select
Auto Program
,
then press the
ENTER
button.
3
Press the button to select an antenna connection,
then press the
ENTER
button.
➢
Air
:
Air
antenna signal.
Cable
:
Cable
antenna signal.
Auto
:
Air
and
Cable
antenna signals.
Channel
Antenna
: Air
Auto Program
►
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Return
Enter
Auto Program
Select the antennas to memorize.
Air
Cable
Auto
Move
Start
Start
Start
BN68-01363C-00Eng.indd 8
2008-02-13 오전 2:25:50