80
2G. microSD Card
4.
Carefully insert a microSD card into the open slot and firmly
push it in until the end of the card aligns with the edge of the
battery area.
5.
With the card now securely installed, place the cover back
into its original position.
Removing the microSD Card
1.
Repeat steps 1 - 4 from “Inserting a microSD Card” above.
2.
Firmly press the card into the slot and release (it should pop
partially out of the slot.
3.
Remove the card from the slot.
4.
Replace the cover back over the open slot.
WARNING:
Do not over-insert the card as this can damage the
contact pins.
Incorrect
Correct
microSD card
slot
Note:
Be sure to use only recommended microSD cards (<
32GB
).
Using non-recommended microSD cards could cause data
loss and damage your phone.
Note:
The microSD card can be easily damaged by improper
operation. Please be careful when inserting, removing, or
handling them.
Note:
DO NOT
remove a microSD card while files are being
accessed or transferred. Doing so will result in loss or
damage of data.
Make sure your battery is fully charged before using a
microSD card. Your data may become damaged or unusable
if the battery runs out while using a microSD card.
PLS-m350.book Page 80 Thursday, June 10, 2010 3:27 PM
Summary of Contents for PLS-m350
