Samsung PE43H4000A, Manual

Page: 69 / 185

English - 23
English
Additional Settings
O
MENU
m
→ Sound → Additional Settings → ENTER
E
• DTV Audio Level
(digital channels only): This function allows you to reduce the disparity of a voice signal (which is
one of the signals received during a digital TV broadcast) to a desired level.
✎
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
✎ To increase or decrease the volume, adjust between the range 0 and -10 respectively.
• Dolby Digital Comp : This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e.
MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night
time.
Line : Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
RF : Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
Reset Sound
O
MENU m
→
Sound
→
Reset Sound
→
ENTER E
Reset all sound settings to the factory defaults.
Selecting the Sound Mode t
When you set to Dual I-II , the current sound mode is displayed on the screen.
Audio Type Dual I-II Default
A2 Stereo
Mono Mono
Automatic change
Stereo Stereo ↔ Mono
Dual Dual I
↔
Dual II Dual I
NICAM Stereo
Mono Mono
Automatic change
Stereo Mono
↔
Stereo
Dual
Mono
→
Dual I
 Dual II 
Dual I
✎ If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.
✎ Only activated in stereo sound signal.
✎ Only available when the Source is set to TV .
[PH4000-RU]BN68-05792L-00L04.indb 23 2014-02-03 7:22:01