C
HAPTER
T
WO
: I
NSTALLATION
2
.5
I
N S TA L L AT I O N
Coaxial Cable
VCR Rear Panel
TV Rear Panel
IN
OUT
ANTENNA
VIDEO
OUT
AUDIO
OUT
L
R
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the
VCR and the antenna
terminal on the TV.
VCR Rear Panel
IN
OUT
ANTENNA
VIDEO
OUT
AUDIO
OUT
L
R
Audio Cable
TV Rear Panel
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
jacks on the TV.
Video Cable
VCR Rear Panel
IN
OUT
ANTENNA
VIDEO
OUT
AUDIO
OUT
L
R
TV Rear Panel
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
If you have a “mono” (non-stereo) VCR, use the Y-connector (supplied) to hook up to
the left and right audio input jacks of the TV. If your VCR is stereo, you must connect
two cables.
Coaxial Cable
VCR Rear Panel
TV Rear Panel
IN
OUT
ANTENNA
VIDEO
OUT
AUDIO
OUT
L
R
1
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This
connection delivers a better picture as compared to a standard VHS VCR.)
Make sure the jacks you are using are underneath the number “2.”
VCR Rear Panel
IN
OUT
ANTENNA
VIDEO
OUT
AUDIO
OUT
L
R
Audio Cable
TV Rear Panel
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the 2 AUDIO
INPUT jacks on the TV.
continued...
00578C(E)-CHAPTER 2 7/3/00 4:38 PM Page 5
