OH85N/(LH85OHNSKGB/**)
Clearance for installation
Clearance for installing the product alone
When installing the product close to the wall, maintain the clearance ( ) in order to secure air flow.
•
Clearance from the wall ( )
–
Example 1) Atmospheric temperatures under 35
℃ without direct sunlight:
60 mm or more
–
Example 2) Exposure to direct sunlight: 200 mm or more
•
Remove any obstacles near the inlet and outlet that may affect air flow.
•
Add partitions between the product and walls and make sure there is no gap between them to prevent discharged
air from flowing back into the inlet.
–
If the unit is subjected to excess heat due to an insufficient gap, this may cause a malfunction, which will not be
covered by the warranty.
Side view
Wall or obstacle
Partition
Clearance for built-in installation
When installing built-in to the wall, maintain the clearance ( ) from the back, top, bottom, and sides of the product in
order to secure air flow.
•
Clearance from the wall ( )
–
Example 1) Atmospheric temperatures( ) under 35
℃ without direct sunlight:
60 mm or more
–
Example 2) Exposure to direct sunlight: 200 mm or more
•
Add partitions between the product and walls and make sure there is no gap between them to prevent discharged
air from flowing back into the inlet.
–
If the unit is subjected to excess heat due to an insufficient gap, this may cause a malfunction, which will not be
covered by the warranty.
Side view
Partition
Wall or
obstacle
English - 9
Summary of Contents for OH85N
Page 5: ...KGB OH85N LH85OHNSKGB ...
Page 24: ...OH85N D K LH85OHNDKGB ...
Page 40: ...OH85N LH85OHNSLGB ...
