Samsung OH85N, Installation Manual

Page: 37 / 60

OH85N-D(K)/(LH85OHNDKGB/**)
Connecting the power cable
– The color and the appearance may differ depending on the product, and specifications are subject to change without
prior notice to improve the performance.
Distribution
switchboard
Make sure that you have a 8.5 mm diameter waterproof power cable that can
withstand 1800 W or higher.
– The power cables from the main display ( ) and the auxiliary display ( )
should be connected to 40 A (20 A x 2) or higher amperage circuits.
Connect the two power cables by soldering and insulate the area.
Place the soldered (connected) part of the cable inside the product.
Once all cables are connected, place the cable staple ( ) back to the bottom
of the main display ( ).
Close the auxiliary display ( ) completely, then fasten the brackets on both
sides of the product.
Different power cable colors by country
When connecting an external power cable, be sure to match the colors of its wires with those of the 3 wires inside the
product’s power cable. The meaning (Neutral, Live or Ground) of each wire color of the external power cable may differ
depending on the country.
– Be sure to refer to the following table to correctly connect wires by the same meaning:
Neutral Live Ground Region
Blue Brown Green/yellow Others
White Black Green or green/yellow America
Blue Brown Green/yellow Europe
Black
Red Green/yellow India
White Black Green or green/yellow Taiwan & Japan
– The guide for OH85N-D(K)/(LH85OHNDKGB/**) only applies when the product is used with an enclosure that has a
protective glass added to the front side.
English - 37