OH85N/(LH85OHNSKGB/**)
Before connecting cables
–
The color and the appearance may differ depending on the product, and specifications are subject to change without
prior notice to improve the performance.
Unfasten the screws, then remove the cover.
Silicone bar
Remove the appropriate silicone bar for the thickness of the cable to connect.
Different hole sizes and corresponding cable thickness for each
–
7 Ø x 1
: Insert the
7 Ø cable
–
5.5 Ø x 6
: Insert the
5.5 Ø cable
–
3 Ø x 2
: Insert the
3 Ø cable
–
8.5 Ø x 1
: Insert the
8.5 Ø cable
Insert the appropriate cable into the hole from which the silicone bar was
removed.
The cable should be connected as shown.
Close the cover, then fasten the screws.
–
After all the cables are connected, make sure to close the cover and
fasten the screws to ensure it is watertight.
–
Recommended torque: 10 - 12 kgf.cm
–
The guide for OH85N/(LH85OHNSKGB/**) only applies when the product is used with an enclosure unit that has a
protective glass added to the front side.
English - 20
Summary of Contents for OH85N
Page 5: ...KGB OH85N LH85OHNSKGB ...
Page 24: ...OH85N D K LH85OHNDKGB ...
Page 40: ...OH85N LH85OHNSLGB ...
