Samsung OfficeServ ITP-5112L User Manual Download Page 75

Page: 75 / 98

AOM PAGE SETUP

DIAL MODE:

Select dial type options. (enblock-requires SEND button to com-

plete the call, or overlap - direct out dial)

•

Scroll to or dial

, press

ENTER

•

Scroll

LEFT/RIGHT

to select desired display option.

•

Press

ENTER

, display confirms save.

STATION ON/OFF:

Turn various features/functions on/off in the keyset.

These features are:

AUTO HOLD:

When on an outside call, pressing a line button, route button or

flashing CALL button will automatically put your call on hold and connect
you to the next call.

AUTO TIMER:

Timer in LCD that monitors call duration.

HEADSET USE:

Switches between headset and handset use.

HOT KEYPAD:

Allows for dialing without lifting handset first.

PAGE REJOIN:

Allows remaining portion of internal page to be played

through keyset speaker, after handset is replaced.

RING PREF:

Allows for automatically answering of calls when handset is lift-

ed. (Does not require button press)

AME PASSWORD:

Allows password protection of AME feature on set. This

prevents unauthorized listening to messages being left.

AUTO CAMPON:

Allows intercom calls to be automatically camped on to,

when a busy station is called.

DIS SPDNAME:

Allows the speed dial associated name to be displayed while

number is being dialed.

SECURE OHVA:

Allows OHVA calls to be received by station in conversation

on handset.

CALL COST DISP:

Display in LCD that monitors call cost, for duration of call.

CID REVIEW ALL:

Allows user to review Caller ID information for calls sent to

the station. The list is programming dependent and operates on a first in first
out basis. Calls to displayed numbers can be returned with a single button
press, provided LCR is being used.

STOP CID DISPLAY:

Discontinues CID information after call is answered.

AUTO ANS CO CALL:

Allows CO calls to be auto answered on incoming calls.

•

Scroll to or dial

, press

ENTER

•

Scroll to desired feature, press

ENTER

to change option status.

•

Press

CANCEL

to enter change and return to main Configuration menu.

5112l_guide.qxp 5/9/2006 9:19 AM Page 74

Summary of Contents for OfficeServ ITP-5112L



































































































Search results

Summary of Contents for OfficeServ ITP-5112L

Reviews:

Related manuals for OfficeServ ITP-5112L

Brands by name

Popular brands

Samsung OfficeServ ITP-5112L, User Manual

Search results

Summary of Contents for OfficeServ ITP-5112L

Reviews:

Related manuals for OfficeServ ITP-5112L

Brands by name

Popular brands