Samsung OfficeServ ITP-5112L User Manual Download Page 46

Page: 46 / 98

If the Hot Keypad feature has been turned off, you must first lift the handset
or press the

SPEAKER

button before you begin dialing.

If a message has been left at your keyset by a keyset in Auto Answer, you must
manually cancel the message after it has been returned.

PROGRAMMED MESSAGES

When you will be away from your phone for any length of time, you can leave a
programmed station message. Display stations calling you will see this message
and be informed of your status or follow your instructions.

•

Dial

plus any of the message codes (

01–20

) listed on the back of this user

guide.

•

To cancel any of these messages you might have selected, dial

plus

•

Press

TRANSFER

to exit and store your selection.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the

SPEAKER

button.

You can have multiple programmed message buttons (

PMSG

) and each one can

have a different message code:

•

Press any programmed message (

PMSG

) button. The message is set and the

PGM MSG button indicator will be lit steady. Press the button again to turn off
the programmed message and the indicator will go blank.

•

Pressing another programmed message (

PMSG

) button will turn the previous

one off and set a different programmed message.

5112l_guide.qxp 5/9/2006 9:19 AM Page 45

Summary of Contents for OfficeServ ITP-5112L



































































































Search results

Summary of Contents for OfficeServ ITP-5112L

Reviews:

Related manuals for OfficeServ ITP-5112L

Brands by name

Popular brands

Samsung OfficeServ ITP-5112L, User Manual

Search results

Summary of Contents for OfficeServ ITP-5112L

Reviews:

Related manuals for OfficeServ ITP-5112L

Brands by name

Popular brands