Samsung OfficeServ ITP-5112L User Manual Download Page 35 | Manualshive

Page: 35 / 98

background image

Using Conference Groups

•

From the idle condition press the

CONFERENCE

button.

•

Select the Conference Group by pressing the corresponding soft key on the
left.

•

Press

SEND

to call all members of the group – OR – press the

ENTER

key to

deselect one or more members, then press

SEND

. As each member answers,

their status indicator on the left will change from an X to a circle.

•

Once you press the

SEND

button to initiate the conference call you can hang

up any member by selecting the member by pressing the

MENU

button and

selecting “SENDING CANCEL”.This action will drop the selected member.

•

When the conference call is finished, place the handset in the cradle or press
the

SPEAKER

key to hang up.

Note: The originating station is the Supervisor of the conference. When this
station hangs up, all the conference group members are disconnected. When
you want to hang up but keep the other members in the conference, press the

MENU

button, the select

SUPERVISOR

, then cursor to another internal sta-

tion, then press

ENTER

and hang up. Control of the conference is passed to

this station. You are free to go about your business.

FORWARDING CALLS

This option allows for one button Call Forward setting. You may forward your calls
to another station, station group or external destination.

Call forwarding may be set in several different manners:

1.

From the dial pad, dial 60 plus the extender (see below) that corresponds with
the type of forwarding desired, followed by the station number to forward to.

60 + 0

Call Forward Cancel.

Cancels all call forwarding from the station.

60 + 1

Call Forward All Calls.

Forwards all calls under any condition.

60 + 2

Call Forward Busy.

Forward calls to another station when you are on

the phone.

60 + 3

Call Forward No Answer.

Forward calls to another station when you

don’t answer.

60 + 4

Call Forward Busy/No Answer.

Sets both Forward Busy and Forward

No Answer.

60 + 5

Call Forward DND.

Forwards calls when you activate DND.

60 + 6

Call Forward Follow Me.

Forward calls to the station where you cur-

rently are.

28

5112l_guide.qxp 5/9/2006 9:19 AM Page 34

«
...
33
34
35
36
37
...
»

Summary of Contents for OfficeServ ITP-5112L



































































































Reviews:

No comments

Related manuals for OfficeServ ITP-5112L

Brand: 2N Pages: 8

Brand: 2N Pages: 83

TOUCH DUAL - Smartphone - WCDMA

Brand: HTC Pages: 2

Brand: UMI Pages: 44

Brand: EMPORIA Pages: 24

Brand: Verykool Pages: 33

Brand: Baldwin Boxall Pages: 93

Brand: Talk To Me Technologies Pages: 2

Brand: HTC Pages: 4

Brand: Samsung Pages: 165

Brand: Zte Pages: 12

Brand: Zte Pages: 25

Brand: Acer Pages: 6

Brand: Lava Pages: 25

Brand: Swyx Pages: 2

Brand: Samsung Pages: 14

Brand: Samsung Pages: 25

Brand: Samsung Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands