20
INTERCOM CALLS
CALLING OTHER STATIONS
•
Dial the extension number or group number.
•
Wait for the party to answer. If you hear a brief tone burst instead of ringback
tone, the station you called is set for Voice Announce or Auto Answer. Begin
speaking immediately after the tone.
•
Finish the call by replacing the handset or pressing the
END
button.
NOTES:
1.
If you have a
DSS
button assigned to an extension or station group, you may
press this button instead of dialing the number.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before you begin dialing.
DIALING THE MOST RECENT OUTGOING /
INCOMING NUMBER
•
Press the
SEND
button.The most recent call (Internal or External to system) to
or from the station will be displayed.
•
Continue to press the
SEND
button and the system will automatically dial the
number for you.
ANSWERING INTERCOM CALLS
•
When your keyset rings, simply lift the handset—
OR
—press the
SEND
button
to be connected to the calling station.
•
Finished the call by replacing the handset or pressing the
END
button.
See Ringing Preference under Customizing Your Keyset.
VOICE ANNOUNCE MODE
When another station calls you, your keyset will sound a brief attention tone and
you will hear the caller’s announcement.
•
Press the
SEND
button to turn on the microphone and speak handsfree—
OR
—lift the handset to reply.
•
To finish the call, replace the handset or press the
END
button.
NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be set
to ON.
5112l_guide.qxp 5/9/2006 9:19 AM Page 26
