Samsung OfficeServ ITP-5112L User Manual Download Page 18

Page: 18 / 98

•

The

[0]-[9]

dial buttons are used to directly choose a menu, or sub menu

options.

•

The

[ENTER]

button in the navigation button assembly is used when saving a

modification.

•

The

[MENU]

button in the navigation button assembly is used to to display

the IP Setup Main Menu.

•

The

[END]

button in the navigation button assembly is used when canceling

or editing the modification, or existing programming.

•

The

[CANCEL]

button in the navigation button assembly is used to go back to

the previous screen or to delete the last digit of a displayed option value.

MENU STRUCTURE

The IP SETUP MENU is configured as follows:

SYSTEM EASY WIZARD

This option will guide you through setting up all required parameters for con-
necting the ITP keyset to your system.

SYSTEM INFORMATION

Version Info: Provides boot rom, software, DSP, and hardware version
information.

Network Info: Displays network mode, IP address of phone, network, and
gateway information.

Netmask

Gateway

Note that items 2 to 4 are only displayed when setting Manual IP.

NETWORK SETUP

This menu allows you to individually setup the same parameters found in the
Easy Wizard.

LOAD & UPGRADE SETUP

Upgrade TFTP Server: The IP address of the TFTP server containing the ITP
software.

Upgrade Start: Starts the ITP software upgrade process.

SYSTEM SERVER SETUP

Server IP Address: The MCP’s IP address.

Server ID: The ID assigned to your ITP (see your phone administrator for
this information).

Server Pass: The password assigned to your ITP (see your phone adminis-
trator for this information).

5112l_guide.qxp 5/9/2006 9:18 AM Page 17

Summary of Contents for OfficeServ ITP-5112L



































































































Search results

Summary of Contents for OfficeServ ITP-5112L

Reviews:

Related manuals for OfficeServ ITP-5112L

Brands by name

Popular brands

Samsung OfficeServ ITP-5112L, User Manual

Search results

Summary of Contents for OfficeServ ITP-5112L

Reviews:

Related manuals for OfficeServ ITP-5112L

Brands by name

Popular brands