Samsung OfficeServ DS-5012L User Manual Download Page 141

Page: 141 / 187

Navigation Menus

DS/ITP-5012L Phone User Guide

128

Move to the number you want to call and press the

[Send]

button.

Search by Group

You can search for telephone numbers using personalised groups previ-
ously registered in the phone. Refer to

Registering New Numbers

and

Editing Groups

later in this section.

Press the

[Menu]

button and use the direction buttons to select

[1. Search]

[4. By Group]

Then, press the

[Enter]

button.

Move to the desired group from the list

of registered groups and press the

[Enter]

button.

Select a phone number (mobile phone,

home, work, etc) and press the

[Enter]

button.

Move to the telephone number you want to call and press the

[Send]

button.

To change or delete the selected number, press the [Menu] button. When the
popup menu appears, select the desired menu to change, delete or register
the number.

Summary of Contents for OfficeServ DS-5012L




























































































































































































Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands

Samsung OfficeServ DS-5012L, User Manual

Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands