connected to the CO call. In order for this option to work the station must also be
programmed for auto answer
•
While on hook, press
TRANSFER
and then dial
110
.
•
Dial
151
to turn Auto Answer CO on or
150
to turn it off.
•
Press
TRANSFER
to store your selection.
NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work. Lines ringing a station group will not cause your phone to Auto Answer.
DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
•
With you handset on-hook, press
TRANSFER
and then dial
110
.
•
Press
111
to turn
DISP SPDNAME
on or
110
to turn it off.
•
Press
TRANSFER
to store your selection.
CALLER ID REVIEW ALL
This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in, first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer. When reviewing this list, you can press one button to dial the
person back. The system must be using LCR to dial the stored number.
•
With you handset on-hook, press
TRANSFER
and then dial
110
.
•
Press
121
to turn
CID REVIEW ALL
on or
120
to turn it off.
•
Press
TRANSFER
to store your selection.
SECURE OHVA
This option allows you to receive OHVA calls via the speaker while you are on the
handset.
•
With you handset on-hook, press
TRANSFER
and then dial
110
.
•
Press
131
to turn
AUTO CAMP-ON
on or
130
to turn it off.
•
Press
TRANSFER
to store your selection.
46
CONFIGURE MOBILE EXTENSIONS
(MOBEX)
This feature allows you to configure options for any Mobile Extension (MOBEX)
ports that are assigned to you by your telephone system administrator. You can
turn a port on or off; set the telephone number for the port; or set the caller ID you
will be calling in from. The caller ID field has no effect unless you have been
authorized as an Executive MOBEX user. Check with your telephone system
administrator for further details on your specific system configuration.
To set the phone number a MOBEX port can reach you on:
•
Press
TRANSFER
and then dial
126
.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
•
Dial
0
to select the telephone option.
•
Dial the number of a C.O. line to use when making calls to this MOBEX port.
•
Dial the phone number you can be reached at by users calling this MOBEX
port.
•
Press
TRANSFER
to store your selection and exit programming.
To set the caller ID of the location you will be calling in from:
•
Press
TRANSFER
and then dial
126
.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
•
Dial
1
to select the caller ID option.
•
Dial the phone number you will be calling in from.
•
Press
TRANSFER
to store your selection and exit programming.
To turn a MOBEX port ON or OFF:
•
Press
TRANSFER
and then dial
126
.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
•
Dial
2
to select the activation status option.
•
Dial
0
to turn the port on, dial
1
to turn the port off.
•
Press
TRANSFER
to store your selection and exit programming. To turn a
MOBEX port ON or OFF:
•
Press
TRANSFER
and then dial
126
.
47
Home Page
ITP-5107S
Table of Contents
