OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 APRIL 2007
MMC: 839
SIP
USER
DESCRIPTION:
This MMC is used for SIP Trunking applications where the SIP source requires
registration on a “per-user” basis. This means that each station on the OfficeServ
7100 system that accesses SIP trunks (inbound or outbond calls) will require an
unique user ID and password.
¾
NOTE: In order to use this MMC, you must set “GW SERVICE”=ENABLE in
MMC 837.
If your SIP server does
not
authenticate on a per-user basis, then this MMC is
not
required.
Up to 100 (01~100) registrations can be entered.
1.
Move cursor (using right soft key) to the registration number and use the
volume up and down button to scroll through up to 100 users.
2.
Press the right soft key to move the cursor to the “usernum” field and use
volume up/down buttons to toggle between “usernum” and “password”.
Enter the “usernum” (usually DID assigned to the station) and the
corresponding password for each registration.
Home Page
Table of Contents