OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 APRIL 2007
MMC: 836
H.323
GK
OPTION
DESCRIPTION:
Provides a means to set the MGI parameters for an optional external industry-
standard H.323 network gatekeeper, using Registration, Admissions, and Status
signaling (RAS). The settings are system wide.
¾
NOTE: When changing any IP address/value, listed below, three digits must
be input for each (octet) field. Example 192.168.1.10 input must be: 192 168
001 010
•
GK CONNECTION:
This determines if the MGI is to connect to a gatekeeper.
The options are: ENABLE or DISABLE.
•
GK ROUTING:
This enables or disables routing of calls through a gatekeeper.
The options are: ENABLE or DISABLE.
•
GK IP ADDRESS:
This is gatekeeper’s IP address.
•
GK NAME:
This is alphanumeric name identifier of the gatekeeper. An entry of 9
characters with a space followed by an additional 6 alpha-numeric characters.
•
ALTER GK IP ADDR:
This provide for an alternate gatekeeper address.
•
H.323 GATEWAY ID:
This is the H.323 identifier used by the MGI when
registering with the gatekeeper. This can be up to 16 characters in length.
•
E.164 GATEWAY NO:
This is the E.164 identifier used by the MGI when
registering with the gatekeeper. This can be up to 16 digits in length.
•
GK KEEP ALIVE:
This is the timer that the MGI uses to acknowledge the
presence of the gatekeeper. The range is 000~999 seconds.
•
GK DOWN ROUTE:
This provides an alternate route in case the primary
gatekeeper is down. Selections are PSTN or ALTER GK.
•
GK RAS TYPE:
Select if AUTO or MANUAL, depending on your gatekeeper’s
capabilities.
•
URQ REASON MODE:
Select ON or OFF for usage of Unregister Request RAS
(URQ) messages.
Home Page
Table of Contents