Samsung OfficeServ 7000 Series, Programming Manual

Page: 20 / 487

CHAPTER 1. Overview of MMC Programming
1-2 © SAMSUNG Electronics Co., Ltd.
1.2 Digital Phones
You need a digital display (LCD) phone in order to carry out programming. These include
DCS Euro keysets and DS/ITP-5000 Series keysets, and some examples are described in
the following sections. All use special programming buttons to select options on the display
screen.
1.2.1 DCS Euro Phones
Figure 1.1 24B LCD DCS Euro Phone
24B LCD phone has 24 programmable buttons: left column is numbered 1-12 from the top;
right column is numbered 13-24 from the top. Buttons 19 to 24 are special buttons ‘A–F’
used for programming.
12B LCD phone has 12 programmable buttons numbered 1-12 from top to bottom.
Buttons 7 to 12 are special buttons ‘A–F’ used for programming.
6B LCD phone has 6 programmable buttons: left column is numbered 1-3 from the top;
right column is numbered 4-6 from the top. Buttons 1 to 3 are special buttons ‘A–C’ and
buttons 4 to 6 are special buttons ‘D–F’ used for programming.
Volume Control Buttons
Volume control for handset,
ring, speaker, etc
Scroll Button
Used to select start menu and
scroll through display options
Soft Buttons (3)
Used to activate
features via the display
LCD
Microphone
Speaker Button
DND Button
Memory Button
Redial Button
Programmable Buttons
With tri-coloured LEDs:
24B = 16 , 12B = 8
Programmable Buttons
With red LEDs:
24B = 8, 12B = 4, 6B = 6
Speaker
For hands-free operation.
Used in place of handset
TRSF Button
Hold Button
ANS/RLS Button
Recall Button
Dial Button
Pullout Directory
Tray