2-5
OR
If the gateway address is blank, use the dial buttons [0] to [9], and [*] to set the
address and press the [Enter] button to save and exit.
You have now completed the network parameter setup. Press the [End] button to
return to the top level menu.
Load & Upgrade Menu
The menu ‘3.Load & Upgrade’ sets or modifies the phone’s upgrade environment.
•
Select ‘3.Load & Upgrade’
. You see:
•
To designate where the phone’s program is to be downloaded from, select
‘1.Load
Option’,
then:
select
‘1.File System’
to operate programs saved in the phone’s flash memory,
or
select
‘2.TFTP down
run’
to download programs saved in the designated
TFTP server to the RAM memory of the phone.
•
To upgrade the program, select
‘2.Upgrade Program’
then
‘1.TFTP server’.
Enter the IP address of the TFTP server from which the program should be
downloaded. Press the [
Enter
] button to start the download.
1.Load Option
2.Upgrade Program
Input TFTP Server
xxx.xxx.xxx.xxx
