OfficeServ 500
USER INSTRUCTIONS
TECHNICAL MANUAL
PART 1 MARCH 2004
1.16
1.12 SETTING STATION ON/OFF OPTIONS
The OfficeServ 500 allows the system administrator to set any of the keyset features
listed below.
FEATURES
DESCRIPTION
00
AUTO HOLD
Automatically places an existing C.O. call
on hold if a CALL button, trunk key or trunk
route key is pressed during that call.
01 AUTO
TIMER
Automatically starts the stopwatch timer
during a C.O. call.
02 HEADSET
USE
When ON, this feature disables the
hookswitch allowing a headset user to
answer all calls by pressing the ANS/RLS
button.
03 HOT
KEYPAD
When ON, this feature allows the user to
dial directory numbers without having to
first lift the handset or press the SPK button.
04 KEY
TONE
Allows the user to hear a slight tone when
pressing buttons on keyset.
05 PAGE
REJOIN
Allows the user to hear the latter part of
page announcements if keyset becomes
free during a page.
06 RING
PREF.
When OFF, requires the user to press the
fast flashing button to answer a ringing call
after lifting the handset.
07
NOT FOR USA
This field is reserved and can not be used
for U.S. software.
08 AUTO
CAMP-ON
Keyset users can allow intercom calls to
camp-on to other keysets without having to
press a CAMP-ON key.
09
NOT FOR USA
10 AME
PSWD
If this option is set to YES, station users
who have AME set must enter their station
password to listen to messages being left.
11
DISP SPD NAME
If this option is set to ON the user will have
the name associated with the speed dial
number shown in the display after the
number has been dialed.
12
CID REVIEW ALL
If this setting is set to OFF the CID review
list will only store CID information for calls
that were not answered at the station and
reject the information for calls that were
answered.
Home Page
Table of Contents
