English 49
W
arr
anty (U
.S
.A)
Warranty (U.S.A)
PLEASE DO NOT DISCARD.
SAMSUNG GAS RANGE
LIMITED WARRANTY TO ORIGINAL PURCHASER WITH PROOF OF PURCHASE
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA
INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser,
is warranted by SAMSUNG against manufacturing defects in materials or workmanship for the
limited warranty period, starting from the date of original purchase, of:
One (1) Year Parts and Labor
This limited warranty is valid only on products purchased and used in the United States that
have been installed, operated, and maintained according to the instructions attached to or
furnished with the product. To receive warranty service, the purchaser must contact SAMSUNG
at the address or phone number provided below for problem determination and service
procedures. Warranty service can only be performed by a SAMSUNG authorized service center.
The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG
or SAMSUNG’s authorized service center to receive warranty service.
SAMSUNG will provide in-home service within the contiguous United States during the
warranty period at no charge, subject to availability of SAMSUNG authorized servicers within
the customer’s geographic area. If in-home service is not available, SAMSUNG may elect, at its
option, to provide transportation of the product to and from an authorized service center. If the
product is located in an area where service by a SAMSUNG authorized servicer is not available,
you may be responsible for a trip charge or required to bring the product to a SAMSUNG
authorized service center for service.
To receive in-home service, product must be unobstructed and accessible to the service agent.
Information codes
Code symbol
Meaning
Solution
Oven sensor malfunction.
1.
Press
OFF/CLEAR
, and then
restart the oven.
2.
If the problem persists, disconnect
all power to the oven range for
at least 30 seconds and then
reconnect the power.
The oven is overheating.
Check the Control PBA NTC Sensor.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal
malfunction.
Oven vent blocked.
1.
If oven vent or cover air is
blocked by aluminum foil or
others, remove that and restart
oven.
2.
To reset error, disconnect power
or tap '
OFF
' after opening the
oven door at least 60 seconds.
** If these solutions do not solve the problem, contact a local Samsung service center or call
1-800-SAMSUNG (1-800-726-7864).
