English 43
Maint
enanc
e
To re-install the oven door
NOTE
You can re-install the upper door the same way you re-install the full door.
1.
Firmly grasp both sides of the door at the top.
2.
With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
Hinge arm
Bottom
edge of
slot
Indentation
3.
Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4.
Push the hinge locks up against the front frame of the oven cavity into the
locked position.
Hinge lock
Locked position
Unlocked position
5.
Close the oven door.
Oven Door: Remove and Re-Install
To remove the oven door
Hinge lock
Locked position
Unlocked position
1.
Turn off the oven.
2.
Fully open the oven door.
3.
Pull the hinge locks away from the oven body and down toward the door
frame into the unlocked position.
1
2
4.
Close the door to 5 degrees from
vertical. This is the removal position.
5.
While holding both sides of the oven
door tightly, lift it up and out until the
hinge arms come clear of the slots at
the bottom of the oven door.
6.
Place the door in a safe location.
WARNING
•
The door is very heavy. Be careful when removing and lifting the door. Do not
lift the door by the handle.
•
Take care when moving the oven door. Improper handling could result in
physical injury.
•
To prevent electric shock, make sure the oven is turned off before removing
the oven door.
NX7000K_VE_NX58M6850SS_AA_DG68-00909A-04_EN+MES+CFR.indb 43
2018-08-29 5:15:10
Summary of Contents for NX58M6850S Series
