Samsung NX-828, Technical Manual

Page: 64 / 186

Programmable Keys
NX keysets have programmable soft keys. Each soft key can be programmed for over 36
different uses to personalise each phone. Examples of soft keys include: individual outside line,
individual station line, group of lines, group of stations and one-touch dialling. Using these soft
keys eliminates dialling access codes. The following soft keys have extenders that identify what
station, group or number that feature key applies to: speed dial, page, directed pickup, group
pickup, door phone and vacant messages.
See: MMC 72 Station Key Programming
Pullout Directory Tray
A pullout directory tray is conveniently located beneath all keysets. Use this to record station
directory names and speed dial numbers.
Pulse To Tone Switchover
When dialling a number on a dial pulse network, a station user can dial # and the system will
begin to send DTMF.
Redial
There are three types of external redial available to all station users, as described below.
Automatic Redial
When a user dials an outside number and receives a busy signal, the automatic redial feature is
used to reserve the outside line and automatically redial the number for a programmable number
of attempts.
See: MMC 50 System Timers
MMC 52 System-Wide Counters
MMC 72 Station Key Programming
Last Number Redial
The most recent number dialled on a C.O. line is saved and may be redialled by pressing the
REDIAL button or dialling the LNR ID.
See: MMC 72 Station Key Programming
Saved Number Redial
Any number dialled on a C.O. line may be saved by pressing the pre-programmed SNR button or
dialling the SNR feature code (17) for redial at a later time. It may be redialled by pressing the
SNR button or dialling the SNR ID.
See: MMC 70 Dial Numbering Plan (Default Code for SNR: 17)
MMC 72 Station Key Programming
3 - 21
NX-828
HYBRID KEY SYSTEM
FEATURES