Samsung NX-828, Technical Manual

Page: 54 / 186

Overflow
When calls ringing a station group go unanswered, they can overflow to another destination after
a preprogrammed period of time. Each station group has its own timer. The overflow destination
can be a station, station group or ring over page.
See: MMC 50 System Timers
Paging
The system allows for the use of four internal zones and one external zone. Stations can page
any individual zone, all internal zones, an external zone, or all zones. Using system programmin
g, each keyset may be allowed or denied the making or receiving of page announcements to/from
any zone.
See: MMC 23 Page Zone
(Internal Page Zone 1, 2, 3, or 4
All Internal Page: 0
External Page: 5
All Internal and External Page: *)
MMC 22 Customer On/Off
(Default for PAGE USE: ON)
(Default for PAGE RECEIVE: ON )
MMC 50 System Timers
(Default Timer for PAGE TIME OUT : 20 sec)
Pause Dial
When dialling an outside call, press the Pause (PSE) button to insert a few seconds, pre-
programmed, pause. (The PSE button is programmed with the required value.)
See: MMC 71 System Key Programming
MMC 72 Station Key Programming
Port Status Check
Users can see the port status through the keyset LCD. There are sixteen (16) status types: IDLE,
BUSY, CALLBACK, PROGRAM, etc.
See: MMC 92 Port Status
Power Failure Transfer
In the event of power loss to the system, the first two outside lines can be automatically
connected to the last two single line stations . When power is restored to the system, the
lines and stations will return to normal operation. Calls in progress will be disconnected.
Prime Line Selection
Any station can be programmed to select a specific line, line group, telephone number, station or
station group.
3 - 11
NX-828
HYBRID KEY SYSTEM
FEATURES