English - 14
initial cleaning
Before the oven is used for the first time, initial cleaning of the oven is required to remove the new oven smell.
1.
Remove all accessories from the oven.
2.
Run oven with convection 200 °C or conventional 200 °C for an hour. This procedure will burn
any remaining production substances in the oven.
3.
Switch off the oven by turning mode selector to off after an hour.
For the first time use of the accessories, clean the accessories thoroughly with warm water,
detergent and soft clean cloth.
using the oven
Your new oven has below basic steps for cooking.
STEP 1. SELECT THE COOKING MODE
Select the cooking mode by turning the mode selector.
STEP 2. SET TEMPERATURE
The temperature can be set after setting the cooking function.
Each cooking function has a different temperature range, refer to the cooking function part in the
manual.
1.
Press the key, temperature figure will blink.
2.
Turn the multi function selector to set desired temperature.
3.
Press the key again to finish the setting of temperature.
During cooking, you can change the temperature in the same order as above.
USEFUL AUTO SPEED PREHEATING
Your oven offers cooking functions, which include a fast preheating stage.
This stage will be indicated beside temperature setting in the display.
During this preheating stage various heating elements are applied to speed up heating of the oven.
Even though you change temperature to higher, the oven automatically change target temperature
and auto speed preheating will be applied. After the selected temperature is reached, the preheating
indicator will disappear and a signal reminds you to insert the food into your oven.
STEP 1
SELECT THE
COOKING MODE
STEP 2
SET
TEMPERATURE
Mode selector
Multi function
selector
Temperature
Neo Lite_NV70H3340BS_WT_DG68-00591B-01_EN.indd 14
2014-07-11 11:12:03
