English - 61
06
tro
U
bleshoo
tin
G
troubleshooting and
information code
troUbleshootinG
If you have problems with your oven, try the solutions suggested below. They may save
you the time and inconvenience of an unnecessary service call.
Neither the oven’s display nor the oven operate.
•
Make sure the plug is properly connected to a grounded outlet.
•
If the wall outlet is controlled by a wall switch, make sure the wall switch is
turned on.
•
Remove the plug from the outlet, wait ten seconds, then plug it in again.
•
Reset the circuit breaker or replace any blown fuse.
•
Plug the oven into a different outlet.
•
Plug a different appliance into the outlet. If the other appliance doesn’t work,
call a qualified electrician to repair the wall outlet.
The oven’s display works, but the power won’t come on.
•
Make sure the door is closed securely.
•
Check if any packaging material or anything else is stuck in the door seal.
•
Check if the door or door switch are damaged.
•
Press Cancel twice and enter all cooking instructions.
The oven does not start when you press the start button.
•
Make sure the door is closed completely.
Smoke and bad smell when initial operating.
•
It’s a temporary condition by new component heating.
Remove the accessories and operate the oven at the convection setting of
200 °C for 30 minutes before using.
There will be a distinctive odor. This is normal. Ensure your kitchen is well
ventilated during this conditioning period.
The power goes off before the set time has elapsed.
•
It may occur a power outage. If there was a power outage, the time indicator
will display: 88:88.
•
Reset the clock and any cooking instructions.
•
Reset the circuit breaker or replace any blown fuse.
•
Make sure the oven is placed properly in accordance with installation guide.
NQ50C7935ES_EU_DG68-00471E-01_EN.indb 61
2014-10-23 12:02:42
