Samsung NE 63 6317S Series, User Manual

Page: 97 / 104

English 45
Maint
aining y
our applianc
e
Hinge lock Hinge lock
Locked position Locked position Unlocked position Unlocked position
3. Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the
locked position.
5. Close the oven door.
Removing and reinstalling the storage drawer
Hook Hook
How to remove the storage drawer
1.
Pull the drawer out until it stops.
2.
Tilt the front of the drawer and pull
out it.
How to replace the storage drawer
1.
Put the left side of the drawer over the
left hook and the right side over the
right hook.
2. Push the drawer until it stops.
Fig. 2 Fig. 2
5. Lift door up and out until the hinge arm
is clear of the slot (Fig. 2).
How to re-install the door
Hinge arm Hinge arm
Bottom Bottom
edge of
edge of
slot slot
Indentation Indentation
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
DG68-01576A-00_IB(FULL)_NE63C6317EN.indb 45 DG68-01576A-00_IB(FULL)_NE63C6317EN.indb 45 2023-06-23 오후 4:29:23 2023-06-23 오후 4:29:23